|
|
|
|
Platinum
Program offers great value and benefits - join the team! |
|
|
 |
Is it time for
restoration?
-
Pantera values
have held steady through thick and thin. Do you realize that
your Pantera is worth more than most Ferrari 308's and that
you could probably buy 6-12 Porsche 928's for what your
clean Pantera is worth?
-
Most owners we
work with swear that their Pantera will be a permanent part
of their collection or that their wife's next husband will
probably enjoy the car as much as they did. We look forward
to our children to someday take over our car and they can
get great pleasure from the Pantera, maybe even more than we
did.
-
Sadly, the tin
worm, shabby workmanship, outdated systems, worn-out parts
and crap paint can spoil the Pantera experience and
devastate the market value and enjoyment of your car.
-
Trust PI
Motorsports, Inc. to restore your Pantera when you are ready
to make the move. Rust repair, GT4 upgrades, custom
bodywork, custom interior, bone-stock restorations, paint
work, engine upgrades, suspension and brake work and much
more are our specialty.
-
Email or call us
to discuss your future plans for your incredible Pantera.
Put our experience to work and get your car ready for the
next 35 years.
|
|
 |
Limited
availability - Carello Red Tail Lights
|
|
|
-
Is it time for
you to refurbish your interior carpets?
-
Why not upgrade
beyond the stock low-rent style carpets and install a set of
our German, high-end carpets and trim pieces.
-
Our kit also
includes thick padding for that plush look and feeling with
added sound insulation.
-
Ready to install
with black trim piping on all carpet pieces.
Platinum Price:
$475.00 for the lock-out arm only Non-Member
Price: $500.00
for the lock-out arm only
 |
|
 |
Reverse -
Lock-Out Shift Gate
-
Billet aluminum
construction with engraved numerals
-
Movable flap
swings into place or out of the way to prevent accidental
shifting into reverse.
-
Highly polished.
-
Includes screws.
Platinum Price:
$92.95 for the shift gate with lock out arm Non-Member Price:
$99.95
for the shift gate with lock out arm -
Lock-out arm
alone:
Platinum Price:
$45.95 for the lock-out arm only Non-Member Price:
$49.95
for the lock-out arm only
 |
|
 |
Old school looks - modern whoa!
 |
|
Pantera weather stripping kit has sufficient
material for front and rear |
DeTomaso Pantera
Weather stripping - Brand New - Factory Style.
Fits the front and rear of the Pantera
Concours appearance
-
For the Pantera
owner who requires bone-stock style weather stripping, we are
pleased to offer our kit which includes sufficient material to
trim the front and rear compartments of your Pantera.
-
This is the best
looking and matching material on the market.
-
Top quality rubber
that will put a smile on the Concour Judge's face while saving
money at the same time.
-
Shipping weight: 10
pounds
Platinum Price:
$110.00 for the
set Non-Member Price:
$120.00 for the
set
|
|
 |
Custom designed and built
seats for your Pantera
-
Modification of
the Pantera is routine these days. Big engines, stompin'
wheels & tires and custom paint & bodywork.
-
Often
over-looked is the interior of your car. PI Motorsports,
Inc. has taken the lead in creating special seats, consoles,
dashboards and panels, such as these seats that were
prepared for a customer.
-
Supply us with
your stock or after-market seats and we do the rest. From
luxurious textiles to practical vinyl. We can do it all.
-
Cost? Less than
a Recaro seat to have proper fitting seats for your Pantera
with unique touches, such as the Isis logo in the headrest.
Call or email us to discuss your application.
 |
|
 |
Gents! Cover that chrome dome and toupe!
PI Motorsports cowboy or
baseball cap for $20.00
Quality embroidery with the
Group 4 PIM logo
Let people know what kind of
car you drive and look cool at the same time.
|
|
Pantera LeMans billet wheel - one of many
styles for the Pantera
|
-
Only PI Motorsports, Inc.
offers the most wheel choices available for your DeTomaso
automobile.
-
From original Campagnolo
wheels to the most modern, high-tech choices, we have them
all.
-
Wheel and tire packages
available.
-
Custom sizes including
for wide-body Panteras and even Mangustas!
-
Fast and friendly advice
is only a telephone call away.
-
Your safety, fitment and
style are important to us.
-
Please
click here to view our full line of wheels.
|
|
|
Pantera Jewelry - Billet
Sway Bar Caps
-
Carved from
billet aluminum are these precision sway bar caps.
-
Pentagraphed
Isis logo
-
Brilliant polish
-
Beats having to
clean and replace stick-on type Isis logos.
Platinum Price:
$39.95 each Non-Member Price:
$42.95 each -
|
|
|
-
Got an open
window on your bellhousing or a not so fantastic plastic
cover?
-
If you have
spent your next mortgage payment on a ZF polish job, why
settle for a cheap looking piece of plastic to adorn your
crown jewel.
-
This piece looks
great even on an original finish gearbox.
-
Adjustable by
the use of two Allen bolts.
-
Pentagraphed
Isis logo
-
Heavy billet
construction - a quality item you will enjoy.
-
Hand polished.
-
Platinum Price: $79.95
-
Non-members: $89.95
|
|
|
-
Billet aluminum
construction
-
Excellent clarity of grooves
and logo
-
Highly defined and precision
edges
-
Precision painting for
concours appearance.
-
A part that you will be proud
to have on your special Pantera.
-
Platinum Price: $199.95
-
Non-members: $209.95
|
|
- Made from precision
forged steel is our clutch arm fork. Tested and in use in some
of the top Panteras and GT40 replicas on the market.
- Stronger
than cast steel.
-
Works and looks great.
- Will work with the ZF
Dash 1 or ZF Dash 2 transmission.
-
Platinum Price:
$125.00
- Non-Member Price:
$135.00
|
ZF Transmission Clutch Arm for Dash 1 or Dash
2 Gearbox
Also will work on GT40 Kit Car
|
|
|
|
|
|
- Fine
jewelry for your Pantera! B/T = Billet Trunion
- Start
with a block of aluminum and carve this attractive and
detailed part out with a CNC machine.
- Poly
bushing for shifting ease
- Isis
logo and reliefs CNC'd into the billet
- A
stylized and improved part for your special Pantera.
- Comes
with nuts and washer as shown
-
Platinum Price: $79.95
- Non-member
price: $84.95
|
|
|
-
If you have a concours
Pantera and you want to freshen up your body tags, here are
reproductions that will make your car look factory fresh.
-
Three piece set or available
individually.
-
Vettura Tipo plate: PI
Member cost: $50.00 - Non-members: $55.00
-
Vehicle I.D. small plate
and Body service No. tags: PI Member cost: $25.00 -
Non-members: $30.00 each.
-
Set price:Platinum Price:
$95.00 for all three pieces
-
Non-member price: $105.00
|
|
|
|
|
|
-
From Bella
Italy, comes these incredible high performance, factory,
press-in A-arm bushings for your Pantera.
-
Sourced directly
from a DeTomaso supplier and as found on the Pantera.
-
Reasonable cost
for a quality built item.
-
Set of 16
pieces.
-
Regular
price: $431.00
Platinum Price: $265.00 Non-member price:
$295.00
|
|
Replacement Ball Joint Set -
Factory parts
|
-
Compare our set of new,
factory ball joints to our competitor's original parts which
are priced at $2,516.85
-
These brand new parts offer a
perfect fit and a great update for your Pantera if your
car's current parts are tired or you are in the process of
restoring your car.
-
Direct replacement
-
The set comes as shown with
all parts displayed..
Platinum Price: $695.95 for the set Non-member price:
$749.95 for the set
|
|
|
PI Motorsports, Inc. Group 4 T-shirt
-
Navy blue and short sleeve
only
-
Quality brand shirt with no
tags
-
Group 4 is the King artwork
is silk screened on.
-
L-XL-XXL
Platinum Price: $15.00 Non-member price:
$17.00
Close ups of the artwork and logo
|
|
|
New Pantera Book! DeTomaso
Pantera
By David & Linda
Adler and Wallace Wyss
-
All color photographs - over
170 photos and other information.
-
Photos by PI Motorsports,
Inc.'s own Dave and Linda Adler
-
Foreword by Tom Tjaarda
-
This book shows Panteras from
the U.S. and Europe. You will see how owners have modified
their cars. Lots of good ideas with interesting captions by
Wallace A. Wyss.
Platinum Price: $18.00 Non-member price:
$20.00
|
|
|
Panteras Forever DVD
-
Sixty minute production on
DVD by Greg Summitt
-
Highlights of the Concorso
Italiano, POCA Convention and interviews with various
owners.
-
An interesting program for
the enthusiast.
Platinum Price: $14.95. Non-member price:
$16.95
|
|
|
-
DeTomaso Enthusiasts never
can seem to get enough marque-themed merchandise. So, how
about these new mats, which can also be used as
wall-hangings.
-
Very thick and plush pile
with highly detailed lettering in contrasting color
materials.
-
Thick binding to prevent
unraveling.
-
Large-size
mat measures: 36 X 48 inches.
Platinum Price: $289.95 Non-member price:
$299.95 -
Small-size
mat measures: 24 X 36 inches.
Platinum Price: $149.95 Non-member price:
$139.95 *Custom
colors available at extra cost.
|
|
|
|
|
Pantera logo mat
|
- Measures 12 X 12 inches
- Rubber anti-slip material on the back
- Use it on your desk, nightstand or dining
room table
- Very thick textile packed with strands of
fiber
- A real conversation piece and coming soon,
door mats and wall hangings.
Platinum Price: $23.00 Non-member price:
$25.00
|
|
|
-
Don't risk scratching your
paint while working on your car.
-
Our new fender cover not only
looks great but will also gently cling to the body of your
car as shown. You can rest a few tools on the top.
-
Embroidered Pantera script.
Cover material looks almost like carbon fiber twill. Buy one
for each fender.
-
Platinum Price: $24.95
-
Non-member price:
$29.95
|
|
Stainless
steel water tube system from PIM
|
Finally! A system that
fits and will out-last the car.
Replace your present system once and for all.
-
10-piece system that is correct
for your Pantera
-
Impervious to rust.
-
Install it yourself or let us
do it for you at our shop.
-
Built exclusively for PI
Motorsports, Inc. Accept no substitute.
-
Make this upgrade part of your
comprehensive cooling system upgrade. Add hoses, clamps and
how about a new aluminum radiator for those hot summer months!
-
Platinum Price: Polished = $422.75 / Non-polished =
$356.25
-
Non-member price:
Polished = $445.00 / Non-polished = $375.00
|
|
For
17 inch and larger wheels only
the ultimate brake system for the Pantera!
-
Here at PI Motorsports, Inc. we know
how to breathe fire into your Pantera with engine upgrades of 500 to
700 horsepower or more.
-
Now, we are pleased to offer our own
brake system for your Pantera that can stop as well as our engines
perform.
-
This is a complete kit with all you
need to get the job done, even includes an emergency brake.
Please
click here for more information and photographs
|
-
Available at extra cost in the color
of your choice or polished. Design your own look.
-
Put our experience to work for you
when it comes to a complete brake system in a package. Everything
you need is here, except a mechanic to do it for you.
-
This system should only be installed
by PI Motorsports, Inc. or a knowledgeable Pantera mechanic.
Although the front brakes are easier to install than the rears, we
do not view this as a "do-it-yourself" system for the
hobbyist.
- Our Group 5 Brake System includes the following:
- Front brakes: 325mm X 32mm, 2 piece vented rotors,
4-piston forged calipers, all brackets, brake pads, stainless steel
flex hoses hardware and instructions.
- Rear brakes: 325mm X 32mm 2-piece vented rotors,
4-piston calipers, emergency brake calipers, stainless steel flex
hoses, hardware and instructions.
- Parts included: rotors, hats, brackets, spacers,
calipers, brake pads, cap screws, washers, hex bolts, stainless
steel flex hoses, caliper fittings and chassis fittings.
- PI Motorsports, Inc. believes 4-piston brake
systems are superior to 6-piston calipers. Why? More gripping
surface on the pistons with 4 pistons than six, which are smaller
and the total diameter is less than having four big ones.
- Total system cost:
Platinum Price: $3,995.95
- Non-member price: $4,195.95
- Upgrades: Color coated calipers: $400.00.
- Upgrades: Polished hats and calipers:
$500.00
|
|
|
PI
Motorsports, Inc. Group 5 aluminum adjustable suspension system
-
We are proud to offer our
customers this complete system. It is ideal for street, show
and track use.
-
Created on a CNC machine from
billet aluminum.
-
This set includes all eight
control arms, all ball joints, bushings, rod ends and more.
-
You will no longer be a slave
to those expensive ball joints, instead, you can install
low-cost, easily available units that can be found on any
Pep Boys or Kragen shelf.
-
All four corners of our
suspension system are fully adjustable by stainless steel
3/4 inch rod ends fitted with polyurethane bushings that can
be offset for additional caster.
-
This system includes all
hardware and ball joints as shown, right down to the last
washer and Cotter key.
-
The adjustable upper-rear
A-arms will help minimize the rapid wear of your rear tires.
Polishing is available (as shown) at extra cost.
-
Platinum Price: $4,995.95
-
Non-member price:
$5,195.95
-
Polishing: Add
$400.00.
|
|
|
Stainless Steel Water Tanks
-
Precision
crafted and brilliantly polished.
-
Replace your old tanks and enjoy
peace of mind.
-
Built to last
and great looking.
|
|
|
PI Motorsports Phenolic Carburetor Spacer
-
Dyno-proven to deliver over
40 horsepower from 383 cubic inch SBC. Your results may
differ but you can expect a surprising gain.
-
More horsepower than a
1" open spacer.
-
Scientifically designed for
maximum undisturbed air flow creating a more even fuel
distribution.
-
The proven unsurpassed
insulating properties of Phenolic.
-
More horsepower per dollar
spent than virtually any other modification.
-
You may have to realign or
adjust your throttle linkage to compensate for the spacer.
-
Some applications may result
in the air cleaner contacting your engine cover. It may be
necessary to modify your engine cover, remove it or use a
lower profile air cleaner.
Platinum Price: $89.95 Non-member
price: $94.95
|
|
|
Isis badge for your placement
-
Hand made badge can be placed
on the side of your car or on front grill or any other
surface, even around a chain to wear around your neck. You
place it wherever you wish.
-
Platinum Price:
$40.00 for a pair.
-
Non-member
price: $45.00 for a pair
|
|
|
At last! EFI for the
Pantera 351C or W, that is user friendly with outstanding
looks.
-
We could write volumes about
owners that switched over to EFI only to have their formerly
dependable Pantera become suddenly undependable.
-
This system is for the owner
who doesn't want to have to use a computer to make
adjustments. Simple and easy to understand.
-
Can be used on the 351C or
Windsor.
-
No laptop computer needed.
Simple controls allow adjustments.
-
Split throttle shaft design
for smooth performance.
-
Our kit includes:
-
Fuel injector manifold
assembled with TPS
-
Fuel rails.
-
Vacuum kit
-
Injectors
-
Wiring and harness
-
Carabine ECU
-
Fine mesh fuel filter.
-
Steel ram tubes
-
Weldon electric fuel pump and
pressure regulator
-
MSD tach adapter.
-
The entire package is factory
tested on a wet flow bench to match the engine fuel flow
requirements and the system comes with a step by step
installation and tuning manual.
-
Options: Polished
aluminum air cleaner/ram tube combo. Remote thermostat
housing. 0-60 psi pressure gauge. Oxygen sensor and reader.
-
Higher horsepower engines
(600+ HP) may require higher flow injectors and/or fuel pump
at a higher price.
|
|
|
Custom-built Oil Pans
-
PI Motorsports, Inc. now
offers hand made oil pans for your special application.
These pans offer individualized drain plugs, windage tray
and baffles. Let us design and build one for your special
car. Prices are much less than you might think. Please call
us to discuss your needs.
|
|
The latest and best evolution of
our famous stainless muffler
-
Stainless steel construction
for long wear and life
-
"Flow-through"
design for increased performance.
-
Husky sound at a reasonable
level.
-
Sculptured case and
aggressive fluted tips.
-
Measures: 22.5" long and
9.5" wide. Inlet pipe measures 2.5" and exhaust
pipes are an in-your-face diameter of 3 3/8".
-
Platinum Price: $150.00 each including tips as shown.
-
Non-member Price: $160.00
each including tips as shown.
|
|
|
|
A special touch for your DeTomaso while on
display
-
Cover up your license plate
with this license plate sized, metal commemorative license.
-
Quality silk-screened.
-
Show some DeTomaso pride.
-
Holes drilled already, just
bolt it on.
-
Platinum Price: $10.00 each
-
Non-Member Price: $15.00 each
|
|
Please click on thumbnail pictures for a larger
photograph
|
Looking for a great set
of floor mats at a decent price?
We have finally brought out our own line of floor mats for
Panteras.
We can whip up almost anything you want to match your interior color co-ordination.
Call us for a price quote!
Pantera script mats are $99.99 per pair
Pantera script with Isis logo: $119.99 per pair
Platinum Price: - take off $9.00 per pair
|
|
|
Seat Belt Pads with DeTomaso Spirit
|
|
|
|
|
-
Trim out the underside of
your front hood with this 5-piece, rich looking and
embroidered set.
-
Made to fit and offers a
tuxedo-like appearance for the owner who desires a finished
and trimmed look.
-
Embroidered Isis logo and
Pantera script.
|
|
|
-
Front trunk mat offers
another level of luxury
-
Quality carpet with bound
edges.
-
Embroidered logo and Pantera
script
-
Trunk mat price: $109.95
-
Platinum Price: $99.95
|
|
|
|
Brand
new Aluminum water pump for the
Cleveland or Windsor
-
Heavy duty,
premium quality.
-
High
performance bearing, shaft and seal.
-
Higher flow
rates than stock.
-
Requires less
horsepower to turn than stock.
-
Direct bolt
on.
-
Over 30%
lighter than stock.
-
Exclusive
counter-bored housing, the bearing cannot "walk
out".
-
Corrosion
resistant backing plate.
-
Highest
quality casting.
-
Platinum Price:
$149.95
-
Non-member
price: $159.95
|
|
-
Designed to work with the
351-C, 351-M and 400-M.
-
190cc intake runners with
2.05" intake and 1.60" exhaust valves that provide
more than enough volume for outstanding power to 6500+ RPM.
-
Superior flow over the stock
Clevland head.
-
Intake and exhaust ports are
in the stock location.
-
Accepts minor porting well.
-
Will work on 302 and 351W
block.
-
Available soon bare or complete as
shown.
Not
currently in stock but coming soon. Thanks!
|
|
|
|
Edelbrock RPM Air-Gap
351-C Manifold
-
Designed to improve
performance on the street or racetrack.
-
Features an open space that
separates the runners from the hot engine oil resulting in a
cooler, denser charge.
-
Offers high-performance
street power from 1,500 to 6,500 RPM.
-
Uses the same technology as
found on the Victor Series competition intakes.
-
Works well with stock 2V cast
iron Cleveland heads or the new aluminum heads from
Edelbrock.
-
Please call for pricing.
714-744-1398
|
|
|
Replacement handle tub
-
New materials and
re-engineered for superior fit on your Pantera.
-
Tub only
- rebuild
with your stock parts.
-
Comes with our unique pin
set-up for easy servicing.
-
Platinum Price:
$124.00
each
-
Non-member price
$134.00 each
*please
do not confuse these with the cheaper ones that are on the
market that do not fit and are not factory parts as
misrepresented. These parts fit correctly.
|
|
Mangusta Floor Mats -
Value Priced
-
Here is a set
of Mangusta floor mats that are affordable and fit.
-
Come with the
Isis logo embroidered with quality thread.
-
Long lasting
and absorbent.
Platinum Price:
$89.95. Non-member price
$99.95
|
|
|
|
-
Concours Quality
Spreader Bar
Rear trunk wheel house hrace
-
A highly
detailed and elegant member to add to your car.
-
Jeweler
quality polishing.
-
DeTomaso and
Pantera script pentagraphed on surface.
-
Lightened body
by hollowing.
-
Platinum Price:
$274.00
-
Non-member price
$289.00
|
|
|
Finally! Wide body
front and rear bumpers
-
Built for the famed
"Blue Bomber" Pantera
-
Many best of show wins thanks
to unique bumpers.
-
Now available for your wide
body, fat fendered Pantera.
-
The original set cost over
$5,000 to execute.
-
Available in thick wall
fiberglass as shown.
-
Platinum Price: $1,395.00 for the front or rear
bumpers.
-
Set price
for Platinum Members: $2,000.00 for front and rear bumpers.
-
Non-members: $1,495.00 for the front
or rear
bumpers.
-
Set price
for non-members: $2,100.00 for the front and rear bumpers.
|
|
-
PI
Motorsports, Inc. offers this inexpensive, supportive and
very attractive replacement seat for your Pantera.
-
Offering
improved driving comfort with special bolsters and seat back
shape with headrest for your safety and proper seating
position.
-
Vinyl material that looks like leather. You can't
beat the price or the look!
|
Make your Pantera the
|
|
Carbon
fiber version below
You
asked for them and now we have them!
|
-
Aggressive and functional
design.
-
Designed for ducting fresh
air to your engine room.
-
Thick construction ensures
that these scoops won't flex or flap in the breeze.
-
Ready to paint. Note wide
diameter ductwork and hose attachment.
Platinum Price: $495.95 for the pair Non-member price:
$525.95 for the pair Carbon
fiber scoops
Platinum Price:
$595.95 for the pair Non-member price:
$649.95 for the pair
|
|
 
|
- Finally,
a hub adapter that works!
- Billet
construction - highly machined and accurate
- Can
be polished at extra cost
- Mounts
right up to the LaCarra brand steering wheel
- Exclusively
yours from PI Motorsports, Inc.
- Billet
hub alone:
Platinum Price: $189.95
- Non-members:$199.95
- Steering
wheel and hub package price for
Platinum Price: $349.95
- Non-members:
$369.95
|
|
|
-
Weber carb system complete
for the Windsor
-
4-48 IDA brand new Weber
carburetors
-
Chrome plated carbs
-
Polished aluminum manifold
-
Braided fuel lines
-
Superb throttle system
-
Platinum Price: $5,595
-
Non-member price: $5,995
-
Cleveland available at
extra cost. Please call for prices
|
|
|
-
Formula 1 inspired Fuel
Injection throttle bodies
for the low-deck Windsor
-
Complete with throttles
-
Exquisite manufacture quality
-
Aluminum construction.
-
Does not include computer,
fuel lines or nozzles
-
Platinum Price: $6,595
-
Non-member price: $6,995
|
|
|
- Fiberglass
GTS Flares
- These
flares fit properly. No excuses and extra fees by the
bodyshop trying to sort out flares that never fit properly.
- High
quality construction.
- Finally,
you can give your car the GTS look without the hassle.
-
Platinum Price: $599.95 for the set of four
- Non-member
price: $629.95 for the set of four
|
-
Carbon Fiber Pre L Bumperettes
-
Highest possible quality in
carbon fiber
-
Looks great and saves weight.
-
Clear-coat already applied
-
Platinum Price: $399.95 per pair
- Non-member price:
$449.95 per pair
|
|
- Convert
early Dash 1 ZF to Dash 2 Bellhousing CAV-GT or Mangusta
- Use
to convert your Mangusta to a Dash 2
- As
used on the PI Motorsports, Inc. equipped CAV-GT.
Permitting the use of the ZF Dash 2 or the fabulous RBT-6
-
Platinum Price: $469.95
- Non-member
price: $499.95
|
|
- Front
hood prop
- Replaces
stock item with billet quality item.
-
Platinum Price: $31.95
- Non-member price:
$34.95
|
|
- Billet
aluminum Optima battery cover
- We
only recommend Optima batteries at PI Motorsports, Inc.
There is no finer unit. We are proud to now offer this
superb dress-up item to go with it.
- Polished
like a jewel with the Isis logo engraved in.
- Comes
with new, tie-down hardware.
-
- Non-member
price: $109.95
- Need
an Optima battery?
-
Platinum Price: $129.99
- Non-member price:
$134.99
|
|
|
-
High performance, custom made
brake pads that now provide modern car braking potential
-
High tech Carbon Kevlar
composition
-
Increases grip by 30-40%
without making a meal out of your rotors.
-
Improved brake pedal feel and
peace of mind.
-
Pure race pads also
available - please call for price
-
Platinum Price: $298.99 for the set of four
-
Non-member price: $319.99
for the set of four
|
|
|
|
Please click here for dyno
test results
-
After long being neglected by
cylinder head manufacturers, owners of Ford Cleveland V8's can
now enjoy the maximum flow potential, thermal efficiency and
light-weight of purpose built heads from Australian cylinder
head specialists.
-
These heads feature the best
elements of 4V and 2V designs with standard 4V valve sizes,
flow aq massive 321 CFM on the intake and 220 CFM on the
exhaust, at just .650" valve lift, OUT OF THE BOX! Great
attention has been paid to port cross sectional area to
achieve these flow figures while still maintaining excellent
air velocity for superior torque and throttle response.
-
Incredibly light compared to
regular cast iron, weighing just 24 pounds each, a weight
savings of 28.5 pounds over the factory 2V iron head.
-
These heads come bare with
high-nickel chrome valve seat inserts, uncut to allow head
porters to perform further work and create their own valve
seat combinations.
-
Standard 4V manifolding and
valve train components allow for economical upgrading from
cast iron heads.
-
Aluminum cylinder heads:
$2,095.00 per pair
-
Platinum Price: $1,995.00 per pair
-
Fully built out heads
available.
Please call to discuss your application.
|
|
Got a crack in your dash or want to cut down on
reflection?
-
PI Motorsports, Inc. offers our new
dash cover
-
Available with or without the Isis
logo and/or Pantera script
-
Quality product with Velcro
attachment
-
Platinum Price:
$49.95
-
Non-members: $54.95
-
Add $10.00 per logo/script
|
|
|
|
-
This is the
system that we use and recommend for all Panteras, especially
where the horsepower has been increased significantly. Used on
our 500 + horsepower engines.
-
We personally
use this system in both the Hound from Hell tube frame Pantera
(9 second quarter mile ET) and Whiplash (Group 5 over 500
horsepower). Works like a charm.
-
Included is the
clutch, pressure plate and throw out bearing as shown.
-
Platinum Price: $356.95
-
Non-member
price:$379.95
|
|
Shown with ceramic coating
|
-
Big
Throat Headers as designed and updated by the legendary Fred
Matsumoto, the founder of Pantera International.
-
Over 25
years of development and customer satisfaction.
-
Now
available for Windsor and Cleveland engines
-
Craftsmanship
in construction
-
Reduced
back pressure
-
Sure
fitting
-
The
most popular headers ever built for the Pantera
-
Platinum Price: $399.95 (Uncoated)
-
Non-member
price: $419.95 (Uncoated)
-
Platinum Price: $549.95 (Ceramic coated as shown)
-
Non-member
price: $579.95 (Ceramic coated as shown)
|
|
|
The 100,000
mile half shaft
|
|
|
- Group
IV Tail Light Lenses
- Will
attach onto stock buckets
- Comes
with adapter kit
- Very
limited supply and once gone, they are all gone!
- $479.95
per set for
Platinum Customers
- $499.95
for non-members
|
|
- High
capacity for better engine protection
- Great
in high speed turns.
- Trick
baffles and trap doors.
- Steel
construction
- Windage
tray
- Holds
ten quarts of oil.
- Includes
pick-up.
- Quality
fabrication to our specifications.
- Ideal
for road racing. No better pan on the market.
- Please
click on thumbnails for larger photographs
-
Platinum Price: $515.00
- Non-member
Price: $545.00
|
|
- Spice
up your secondary gauge panel with our pure carbon fiber
gauge panel
- Simply
transfer your gauges and switchgear and voila!
- Even
Mercedes have the carbon fiber look, now we can too.
-
Platinum Price:
$348.95
- Non-member
price: $365.95
Large image
|
|
- Vapors
II-sucks
like a Hoover on steroids
- The
finest intake manifold we have ever offered
- 351
Cleveland only
- 20
horsepower more than competing units
- All
aluminum
- Best
with our 750 CFM Holley
- Fantastic
top end charge!
- 7.5
inches tall from valley pan to the top.
- Perfect
for Panteras.
- Like
a piece of sculpture to look at-check out the quality and
design in the photographs to the right.
- Vapors
II -
Platinum Price: $645.95
- Vapors
II - Non-Member Price: $695.95
- Stainless
Allen bolt set: $24.75
- Gasket
set: $27.95
|
|
|
-
Advantages:
Stronger than stock, lighter and perfect for high performance
applications
-
Pricing: $99.99
for the set
-
Platinum Price:
$89.99 for the set
|
|
- Clutch throw out bearing
and retaining hub
- Billet steel not cast
- New high performance sealed throw out bearing
- Adjustable for any clutch
- Height adjustable for Borg &
Beck, long style, or diaphragm
type clutch
- Quality machine work
- $139.99
Platinum
Members
- $149.99 Non-PI Members
|
Stock unit shown on left |
-
Carbon fiber faced gauges
-
Outrageous appearance
-
Chrome bezels
-
Set includes fuel, oil
pressure, water temp and alternator
-
Brushed silver finish
-
Safer, reduced fire hazard and
increased accuracy.
-
$269.95
Platinum Members
-
$289.95
Non-members
|
|
- PI
Motorsports, Inc. Master Brake Cylinder
- New,
not remanufactured
- Retain
your stock reservoir
- 1
1/8" Bore
- More
fluid and better braking
- Direct
replacement with no adapters
- $219.95
Platinum
Members
- $229.95
Non-PI Members
|
|
- Brass window gears
- Less prone to failure than stock
plastic items
- Precision machined
- Value priced at: $39.95
for
Platinum
Members
- Non-PI Members: $42.99
|
|
- Modern window switches
- Higher degree of reliability
- Increased reliability
- Rounded corners
-
Platinum
Member price: $44.95
- Non-member price: $48.95
|
|
- European amber tail-light lenses
- Distinguish your car from the
rest of the pack
- Bolts right on
- Very limited supply
- $299.95
Platinum
Members
- $325.99 Non-member price
|
|
|
-
Now you can externally adjust
your valve timing easily
-
Aluminum housing
-
Heavy duty belt drive
-
Less camshaft harmonics
-
Less wear on the valve train
-
Less horsepower to drive the
assembly
-
All Hardware included for stock
water pump
-
More accurate timing
-
$695.00
Non-member
price
-
PI
Member Price $649.95
|
351 Windsor only
|
|
-
Solid carbon fiber
-
Highest quality
-
Accents your
interior richly
-
Add the billet
shift knob for full treatment.
-
Replacement
chrome shift gate is $69.95 as shown. We also offer a
plain and thinner model. Includes screws.
-
Carbon Fiber
Shifter Backing Plate:
Platinum
Members Price:
$144.95
-
Non-member price:
$154.95
|
|
|
|
|
|
|
|
-
Optima Gel Battery
-
The contents
will not leak out or spill on hard cornering or worse yet, roll-over
-
800 Cold cranking amps
-
Long lasting and
powerful for hard starting cars
-
Saves weight, only
39 pounds
-
Platinum
Members: $159.99
-
Non-member price:
$169.99
|
|
