Semi monocoque, welded high grade stainless steel, integral
roll over and side impact protection.
Independent unequal length wishbones offset A frame, anti
roll bar, billet aluminum upright (front).
Independent double trailing links, lower inverted A frame
and upper transverse link wishbones, anti-roll bar, aluminum
Built in Anti dive, and anti squat, near zero bump steer.
Competition coil over type gas dampers shocks with
adjustable damping rate and variable spring height.
BRAKES --Dual circuit, front rear split with servo
assistance, tandem master cylinder, Proportioning valve.
11.375” ventilated discs (front).
11.375" ventilated discs with separate handbrake
--Rack and Pinion. 2.9 turns from lock to lock overall ratio
style alloy pin drive replica with center knock-off hub,
7.5” x 15 front, 9.5” x 15” rear.
From March 2002 BRM alloy pin drive replica with center
knock off 8" x 15" front 10" x 15" rear.
(2)--10 gallon fuel safety cells sill mounted. Original
style filler caps, total capacity 20 US Gallons. Individual
electric pumps and filters with dash change over switch.
efficiency, six core front mounted aluminum radiator with
twin auxiliary electric fans., Thermostatically controlled
with manual override .
Style: GT40 Mk.1 Length: 164.5”.
Width: 70” Height: 40.5.
Wheelbase: 95” Dry Weight: 2,150 lbs.
Ground Clearance: 5”.
Sprint technology Carbon Fibre /Kevlar composite .
Cockpit Molded finish inside body.
Carpet Wool automotive quality.
Seats Adjustable fore/aft, Vinyltex with brass grommets,
pedal box adjustable for tall drivers.
Original style gauges (VDO) and switches (Lucas) Smiths or
Autometer available. All circuits fused and relayed, rear
Cibie headlamps, all other lights original pattern.
Battery master isolator switch.
PI Motorsports, Inc. 427
"Crate" Motor. Offering over 540
horsepower, this engine will supply the gut-wrenching
performance you would expect from an automobile of this
beauty and heritage.
Stainless steel original pattern “Bundle of Snakes”
eight branch header system with two collectors, muffler and
stainless steel heat shield
Electronic breaker-less is recommended