"The wheel that the Pantera should
have had in the first place"
PI Motorsports, Inc. customer Joe Wagner
|
Mr. Tom Tjaarda, the designer of the
Pantera
This is what
Tom Tjaarda had to say
about his new wheel design:
"As a matter of history, years ago, when I made the
original design for the wheel, there was little time to go into
too much detail on the drawings sent to the wheel manufacturer.
Only a very rough scale design was made on paper, things like
radius would be worked out later on the model. I did not work
out every radius. The manufacturer just went ahead and produced
the wheel thinking that the drawing was the final solution. And
it just stayed that way. The modifications we have
accomplished are what the wheel should have looked like in the
first place. Personally, I was never very
enthusiastic about the original Pantera wheel because it looked
unfinished and amateurish, but now, it not only looks finished
and much more refined but also integrates with the overall
design concept of the Pantera"
Tom Tjaarda |
|
please click on thumbnail images for
larger photo
|
|
PI Motorsports,
Inc. in conjunction with Tom Tjaarda's Tjaarda Design of Torino,
Italy, is pleased to now offer these very special aluminum
wheels. |
|
The quality and beauty
are the direct specification of Mr. Tjaarda. These are wheels you
can be proud of. |
|
The wheels measure 17
X 8 in the front and 17 X 11 in the rear. |
|
The wheels are
currently undergoing safety testing and will meet or exceed the
highest safety standards. |
|
Made from billet
aluminum. |
|
Will not interfere
with your suspension and will fit within your stock wheel wells |
|
Each set of wheels
will be numbered and will include a certificate of authenticity,
personally signed by Mr. Tom Tjaarda. |
|